Q&A - Doc David

Dear David,

I am again interested in and have a question on the 660 nm laser probe for the Q1000. The 660 nm laser probe features a 50 mW ‘red laser’ diode with a power output of 30 mW. Is it my understanding that the 30mW power output is the limiting factor in the use of this probe, and that the joules of work produced would use the 30 mW power output in the joules equation? What is the reason other than full disclosure, the reason for mentioning the 50 mW red laser diode? Where does the 50 mW red laser diode fit into the process? If the power output could be raised to 50mW, that would ulilize the full capacity of the red laser diode, and if raised to 60mW power output,what is the result? Not that I would want to do that, but for clarity of the use of this instrument.

Also, how safe is this laser to use inside the mouth on tissues of the oral and nasal pharynx using a dental mirror to reflect the light?

Thank you,

Alex Baumer DMD

Alex,

So many questions … and luckily there are easy answers.

To sum up if you want the life of a laser diode to last a lifetime —- do not use it, at its Wattage rating.  The 50Mw 660 laser diode is only being used for 30Mw or 6.6 joules of energy in 3 minutes will last longer then a 30Mw Laser Diode being used at its full Wattage.

When a laser diode is used to it full capacity it is like the full throttle on a car being on all the time there is no breathing room but when you use less of the wattage or horsepower,  then it lasts longer than full throttle. It is all about Duty Cycles and its typically cheaper to purchase the 30 Mw laser diode initially but not over the whole duty cycle of the Laser being used.

Since we are the only company that I know that has a LIFETIME warranty for one payment upfront $200 per laser) … these Lasers are built to LAST.

Same with the 808 enhancer where it’s a 500 Mw Laser diode being under utilized to last a lifetime.

When a laser diode does not get used to it full wattage range it runs much cooler and with longer Life.

For your other question, If a 50 Mw Laser diode current gets exceeded to 70 Mw it burns out like light bulb that got too hot and typically quickly…

These Enhancers were built to be used in the Mouth…by a Dentist and with the Quartz Tip I believe they are the best deal on the planet…

No worries that I am aware of with reflected light off the mirror… main reason is because these laser are not Focused beams … the beam is not focused into a pin light which would be a problem if used in mouth with mirror…. And you get it reflected into your eyes or someone else’s.

Laser diodes need a mirror system before it comes out of the aperture to focus the beam …. These lasers do not have focusing mirrors and one of the reason why we do not use any goggles with these lasers…. The beam is so spread out that by the time it gets to the eyes the beam is larger than the eye and with that dispersal pattern no harm can be done.

We place the 808 and 660 usually right on the area being treated… so there is no need to focus the beam unless you want to smoke the hairs off of the arm or face like a cutting laser can do… These lasers are safe for dental usage for patient and practitioner/assistants using them.

Does that help Alex?

Now are you ready for my dental miracle that occurred about 3 weeks ago in Mexico?

I had a much bigger infection cavity under one of my filling that was cracked then I thought… I got an emergency appointment with one of Dr. Hal Huggins DDS students in Porte Vallarta MEX. The infection went down to the Pulp… typically painful beyond belief and always a root canal… well “no root canals for ME…”

I Used the 808 and 660 enhancer to reduce the inflammation that would be occurring and help with the pain of the operation. I had used the equipment before on myself with no discomfort but never anything down to the pulp. I had NO pain … No Discomfort and the Dentist and assistant could not believe it… they packed it a special way and filled with a glass filling which hardened and they were impressed how little bleeding occurred during the whole procedure.

He gave me a 50 50 chance to keep the root and now after 30 days NO WORRIES NO PROBLEMS…

I of course used the most true SCENAR signal device on the planet called the DOVE… see www.truescenar.com for more info if you would like. Total cost with this DDS in Mexico was $50.00 USD — no way anyone in USA would spend the 35 minutes for all he did for this price.

I have been using the Scenar and Lasers on it every other day and it feels great…. I am Now ready for a permanent crown with bio compatible material and to go back to Mexico and sell this DDS a laser system… and get the crown and more teeth done.

Incredible and WORTH it….

So Alex the Laser system of Q1000, with 660 enhancer and 808 enhancer I believe is the best tool kit that a Dentist can purchase for the price and the incredible wide range of uses for these devices. Sure you can purchase cheaper and much more expensive Single Wavelength Laser systems, but not the system of Resonating and Stimulating Soft Lasers with 7 different Wavelengths in one package.

And check out these pictures of LASER/SCENAR fusion http://www.gardenwithin.net/testimonial.html, that happened right here in Gilroy… and treatment was done by a lay person and not a licensed health care practitioner… actually was done by person in an area Gilroy Church to help one of the people in the church who was burned. AWESOME and simple….

http://www.gardenwithin.net/testimonial.html

So let me know how I can be of service and now also have a special deal for our new laser clients…

3 hours of Soft Laser Training allowance for a purchase of Q1000 and 1 hour for the purchase of each enhancer.  We now have a new 1.5 hour training DVD that is excellent in its simplicity and deep training insights available.  We are the only company that does Soft Laser/Scenar fusion training….

So much has changed since I saw you over 18 months ago…

Keep in touch,

David Gawain, Doctor of Natural Medicine